Pools and Spas POSEIDON, in partnership with CUSTOMSPACOVER.CA, offers custom-made spa cover in order to protect your spa against bad weather and to enable you to lower your heating and maintenance costs. Moreover, our spa covers are designed to resist the Canadian great colds and the weight of snow. Our solid and robust construction is perfect for replacing your old covers.
2 ways to order your spa cover now:
*Prices of customised cover start at $295 + taxes and shipping is included.
*If you are not certain of your measurements or if you need more information do not hesitate to contact us. We have most sizes for the various spa brands.
With a choice of 19 colors and a thickness of 25 ounces, we use a marine vinyl that is robust and resistant to harsh weather conditions and tears, even those caused by the cold of winter. The material is impregnated with UV and mildew inhibitors as well as an antibacterial treatment.
The perimeter skirt is designed to seal in heat, prevent water evaporation and protect the acrylic border of the spa. The standard length is 2 inches with the option of longer lengths available.
The central layers of polystyrene are reinforced across the width by a 20 calibre galvanized steel “C” frame. It protects against the cover caving in under heavy loads of snow.
Double point clips available in 4 thicknesses of reinforced vinyl insure an increased strength and a greater stability when attached. Moreover, they are attached with a plastic buckle which contains a key lock for greater safety and conforms to local bylaws.
Handles are placed at the edges of the cover for easy lifting and removal. They are strategically reinforced at points of high stress in order to avoid tears.
It is designed to ensure water rolls off of the spa cover as well as protecting it against damage from harsh weather conditions. Consequently, it acts as an insulation layer in the cover, and retains heat in the interior of the spa.
| Name | Taper | Density | R Value |
|---|---|---|---|
| Sirocco | 3’’x2’’ | 1.5 lbs | 13.11 |
| Chinook | 4’’x3’’ | 1.5 lbs | 17.5 |
| Bora | 5’’x4’’ | 1.5 lbs | 19 |
| Blizzard | 5’’x4’’ | 2 lbs | 21 |
A 2 mm thick polyethylene plastic lining for the polystyrene core is tight fitting with an airtight seal, and is resistant to chemical products. It serves to inhibit water infiltration and moisture accumulation inside the cover.
The middle of the cover is reinforced by a central rubber section flanked by two pads, which allows heat to be retained in the interior of the spa and minimizes evaporation.
The cover design includes the use of high quality weather resistant thread and precise stitching which results in a sturdy and elegant product.
On the interior side of the cover, these well finished holes allow evaporation water from the spa to drain.
An anti-rust and anti-corrosion zipper opens easily to allow removal of the central polystyrene layer.
Each step, each thread, and each stitch is subject to a double inspection in order to assure an exceptional quality finished product.
All covers comply with the standards of the ASTM security manual.
Our experienced manufacturers create custom made covers that conform in all ways to your specifications for size and style. With a margin of error of less than 0.5” on any measurement, the cover is made with great precision. The covers can be used for new or old spas.
With regular care and maintenance, your cover can last for years. Each cover comes with instructions on proper maintenance in order to extend the useful life of your product.
The illustrated colors are a reasonable approximation of the available colors of vinyl, however, they can look different in daylight compared to artificial light. They can always be subject to discoloration due to exposure to UV light.
The cover uses “CFC-free foam”. The foam manufacturing process uses steam rather than ozone-depleting Freon agents thus protecting the ozone layer.