Téléphone
25 July 2011

What to do after a bronze package opening ?

  1. Let the filtration do his work for 24 hours
  2. Do a backwash
  3. Remove most of the leaves in the bottom of the pool using one draws
  4. Add powdered chlorine and algaecide to water in the evening
  5. Let the filtration do his work for 24 hours
  6. Do a backwash
  7. Clean the pool with your vacuum cleaner while positioning your filter at « drain » or « waste »
    (The water will go straight to the street and the water level will drop quickly)
  • Put the hose into the skimmer, close to the suction pipe of the vacuum, to make a seal around the pipe to not let air back when the pool level drops below the skimmer
  • Go empty the pump basket regularly

10. Brush the walls and the bottom of the pool

11. Clean the skimmer and the steps with a vinyl cleaner

12. Do a backwash

13. Fill the water up to ¾ of the skimmer (ideal level)

14. Add chemicals needed to achieve the ideal level for all chemical parameters. Add a product at a time with four hours of delay between each

15. Get the following parameters for your water :

Alkanity : 80-120
pH : 7,4-7,6
Hardness : 200-300

16. Add chlorine daily or always keep 2 to 3 slices of chlorine in the chlorinator to get the following parameter: Chlorine : 2,0-4,0

 

What to do after a silver package opening ?

  1. Let the filtration do his work for 24 hours
  2. Do a backwash
  3. Remove most of the leaves in the bottom of the pool using one draws
  4. Let the filtration do his work for 24 hours
  5. Do a backwash
  6. Clean the pool with your vacuum cleaner while positioning your filter at « drain » or « waste »
    (The water will go straight to the street and the water level will drop quickly)
  • Put the hose into the skimmer, close to the suction pipe of the vacuum, to make a seal around the pipe to not let air back when the pool level drops below the skimmer
  • Go empty the pump basket regularly
  •  

  • Brush the walls and the bottom of the pool

10. Nettoyer les marches et l’écumoire à l’aide d’un nettoyeur à vinyle

11. Do a backbwash

12. Fill the water up to ¾ of the skimmer (ideal level)

13. Add chemicals needed to achieve the ideal level for all chemical parameters. Add a product at a time with four hours of delay between each

14. Get the following parameters for your water :

Alkanity : 80-120
pH : 7,4-7,6
Hardness : 200-300

15. Add chlorine daily or always keep 2 to 3 slices of chlorine in the chlorinator to get the following parameter: Chlorine : 2,0-4,0

What to do after a GOLD package opening or a cleaning after opening ?

  1. Let the filtration do his work for 24 hours
  2. Do a backwash
  3. Open all suction valves (main drain and skimmer) or remove the plate or suction system located in the skimmer otherwise
  4. Add chemicals needed to achieve the ideal level for all chemical parameters. Add a product with a 24-hour delay between each
  5. Get the following parameters for your water :

Alkanity : 80-120
pH : 7,4-7,6
Hardness : 200-300

  • Add chlorine daily or always keep 2 to 3 slices of chlorine in the chlorinator to get the following parameter:

Chlorine : 2,0-4,0

 

What to do after a waste opening?

  1. Fill the water up to ¾ of the skimmer (ideal level)
  2. Activate the pump breaker
  3. If you have a problem starting the pump call Pools and Spas POEIDON inc.
  4. Let the filtration do his work for 24 hours
  5. Do a backwash
  6. Add chemicals needed to achieve the ideal level for all chemical parameters. Add a product with a 24-hour delay between each
  7. Get the following parameters for your water :

Alkanity : 80-120
pH : 7,4-7,6
Hardness : 200-300

  • Add chlorine daily or always keep 2 to 3 slices of chlorine in the chlorinator to get the following parameter:

Chlorine : 2,0-4,0


0 comment

ACPQ
Pool Hot tub concil
APSP
Régie du Bâtiment du Québec