Precautions for a swimming pool equipped with a salt system
- Be sure that all the equipment (pump, salt system, water heater) are on the ground
- Check the salt level displayed on the controller twice a week, never go below 2600 ppm and never exceed 3500 ppm
- Check the level of chlorine in the pool twice a week, if chlorine is too low, increase the production and if it is too high, lower the production
- If you install your solar blanket for over 24 hours, always stop the salt system
- Clean once a year the cell using the product made for this purpose
- Check and calibrate the pH and alkalinity at least once every 2 weeks
- Do not exceed 200 ppm of calcium hardness
